Cyklop Baby Umet 75
Powerful, easy to use, simple to feed tape. The Baby Umet 75 offers an extra heavy duty motor for tough applications and feed rollers that are useful with both thin plastic imported tapes, the very tacky duct tapes, and many more "stickier" stapes used in production areas.
The Baby Umet 75 dispenses tapes from 1/2" up to 3" widths at the rate of 12" per second. The dial setting will offer pre-measured lengths of 2" up to 50" with rolls of tape up to 7 1/2" diameter. The picture makes the unit look big, however the overall footprint is slightly larger then the M1000.
- Small, Compact, Heavy Duty
- Easy to use
- Blade Safety Mechanism
Operator simply pulls on the tape against the protected serrated blade for fast and easy tape cutting. If a clean cut is desired, or for an automatic cutting unit, see the new SAE-75 by clicking here. (The automatic feature on this machine is best when the operator is using a piece every 9 seconds or less. The safety blade feature will activate preventing the operator from being able to cut the tape if it is not removed within 10 seconds).
Electrical power: 115v, 60 hz
Types of Pressure Sensitive Tape: PVC, polypropylene, reinforced, bi-adhesive, etc.
Sound level: Less than 70 dB(A) plus "tape release from roll" noise
Width: min. 15mm./max. 75 mm.
Length: min. 50 mm./max. 1300 mm. (2"-50")
Dispensing Speed: 18 m./minute (12")
Dimensions of machine: 160x280x205 mm.
Weight: 6 Kg. or 13.2 pounds
The Baby Umet 75 offers a random key, a dial setting for one set length, a repeat key, and a blade protection feature.
Click here for an Operators Manual. Click here for the parts list.
The best way to determine the best machine for dispensing your tape is to send us a sample end roll of tape and the spec for dispensing. Include information regarding the number of pieces per minute and if you require automatic dispensing.