Better Packages BP333
Tape and Pressure Plates
Better Packages changed the TS333 during 2002, but returned to the older style in 2007. Below are some of the parts that changed. The top picture is the old style (feed wheels and upper tape plate are the same), the lower the new. Holding your mouse over the part will show the part number.
The following pages are available:
Underside Area Water Parts Cutting Blades
Handle & Gear Area Gear Cover Inside the Top Cover
Hold your mouse over the part you need and the number will appear.
Scroll below for the version with the two piece lower tape plate.
| FM12EL | Upper Tape Plate |
| FM11X | Aluminum Lower Tape Plate |
| PW77X | Upper Feed Wheel |
| FM16X | Pressure Plate Assembly |
| FM18 | Brass Rollers |
| E580SA | Pivot Rod for Pressure Plate |
| E580RA | Retainer |
| FM39XXX | Lower Idler Assembly |
In 2002 Better Packages changed the Lower Tape Plate and added a "J" plate and changed the Pressure Plate Assembly to accommodate future E-Z Pull Tab Tape. Note the changes in the style Pressure Plate and an added a Support Bracket. These parts will only fit the older machines if ALL are replaced at the same time. After 2007 Better Packages went back to the old style FM11X lower tape plate.
Pictured are the parts for the TS333 with the two piece lower tape plate.
| FM126J | "J" Plate |
| FM11JX | Aluminum Lower Tape Plate |
| FM130JX | Plate |
| TS33300601 | Pressure Plate Assembly w/Weights |
| TW24EB | Weight slug (2 per machine) |