Bottle-Matic
Parts List
Double sided dispenser above with all the updates and
an older single sided round label applicator below.
Circuit Board Area -Labeling Area -Loose Parts - Motors Area
| Part No. | Description |
|---|---|
10" Parts: |
|
10005 |
10 Dispensing table |
10009 |
10 Hold-Down Plate |
10010 |
10 Roll Holder Rod |
10106 |
10 Rubber Drive Roller (2) per machine |
10172 |
1/2 x 10" Chrome Rod |
101081 |
10 Chrome Feed Roller |
101082 |
10 3/8" Blued Rod |
101083 |
3/8 x 10" Chrome Rod (2) per machine |
BM10010 |
10 Aluminum Bottle Roller |
BM10172 |
1/2 X 10" Flat Shaft |
16" Parts: |
|
16106 |
16 Rubber Drive Roller (2) per machine |
16108 |
16 Feed Roller Assembly |
16172 |
1/2 x 16" Chrome Rod |
18005-s |
Dispensing table (sharp) |
18009 |
Hold-Down Plate |
18010 |
Roll Holder Rod |
161081 |
16 Chrome Feed Roller |
161082 |
16 3/8" Blued Rod |
161083 |
3/8 x 16" Chrome Rod (2) per machine |
161084 |
Feed Roller Hinge (2) per machine |
161085 |
Hinge Bushing (2) per machine |
161087 |
Long Hinge Spring (2) per machine |
BM16172 |
1/2 X 16" Flat Shaft |
Common Parts: |
|
16121 |
115v. Toggle Switch |
16125 |
115v Power Cord |
16131 |
5/8 Bronze Bushing (2) per machine |
18006 |
Table Lock |
18015 |
Table Lock Bolt |
45172 |
3 Collar for Roll Holder w/thumb screw (2) per machine |
45201 |
3 Core Insert (Set of 2) |
45204 |
Rubber Grommet |
BM003 |
Footswitch |
BM007 |
Right Side-Frame |
BM008 |
Left Side-Frame |
BM009 |
Bottle Adjustment Bar (2) per machine |
BM010 |
Aluminum Bottle Roller |
BM012 |
Aluminum Bottle Roller Block w/bushing (2) per machine |
BM014 |
Pressure Arm Assembly |
BM015 |
Bottle-Guide (plexi) |
BM016 |
Bottle-Guide Mounting Block |
BM019 |
Roll-Guide (2 per set) |
BM020 |
Roll-Guide Tension Spring (2) per machine |
BM115 |
115v Motor (4276) - Back |
BM130 |
Black Motor Housing (2) per machine |
BM1051 |
Switch Housing |
BM1152 |
115v Motor (4275) - Front |
BM16105 |
Microswitch Housing Assembly |
BM161052 |
Switch & Lead Wire |