Dispensa-matic
Bottle-Matic Label Applicators
The perfect machine for labeling your cylindrical containers! Our machines will wrap your bottles, cans, tubes, and jars! The Bottle-Matic is available in three different sizes to save on table space. Label objects from .5" to 10" diameter. By adjusting the front idle roller, this unit will even handle some tapered containers.
Even if your can or bottle has ridges we can customize the rollers to work with them. It's simple - just send us your container and a roll of labels, then we'll do the rest. We work with the factory at Dispensamatic to customize your Bottle-Matic. Customizing is based on an hourly charge, but if we can't make it work, you'll pay NOTHING!
Single Label Model:
Cylinder type label applicators with speeds up to 1000 Pieces per hour!
Made in USA 
Video
If you need a NAFTA Certificate with your purchase to Canada
or Mexico request one at the time of purchase!
| Item Number | Description | Base Price | Best $ |
|---|---|---|---|
| 135M-BM16 | Bottle-Matic 16" Single Sided Label Dispenser up to 15 1/2" | $1,675.00* |  |
| 135M-BM10 | Bottle-Matic 10" Single Sided Label Dispenser up to 9 1/2" | $1,595.00* | |
| 135M-BM6 | Bottle-Matic 6" Single Sided Label Dispenser up to 5 1/2" | $1,525.00* | |
| 135M-BMII16 | Bottle-Matic II 16" Two Sided Label Dispenser up to 15 1/2" | $1,995.00* | |
| 135M-BMII10 | Bottle-Matic II 10" Two Sided Label Dispenser up to 9 1/2" | $1,924.00* | |
| 135M-BMII6 | Bottle-Matic II 6" Two Sided Label Dispenser up to 5 1/2" | $1,849.00* | |
| 135A-BMR4 | BMR4 Optional Rewinder 4" | $375.00 | |
| 135A-BMR6 | BMR6 Optional Rewinder 6" | $375.00 |
Support: Microswitch Adjustment - List of replacement parts.
 |
The Optional Rewinder for the BottleMatic makes the job of keeping up with the label liner waste easy. Available in either a 4" or 6" width. The rewinder must be ordered at the time you order the machine. |
Standard machine takes up to a 9” diameter roll. With the optional roll adapter the unit will take a roll up to 15”. In either case the maximum weight shouldn’t be more than 10lbs. Also, like most our machines you can also use fan-fold labels as long as the labels feed thru the web freely. Minimum gap between the die cut labels for the machine to work is 1/8". Patent Pending.
Check with us for the correct copy position of the label on the roll so the label will apply in the correct position. Labels should be produced in "Position 3" or "Position 4" for most products. The best position for wine bottles is #3.
Front & Back (Two Sided):
Label is in "position 3" for wine bottles because the bottle extends past the left side frame.