Phoenix E1 and E2 Series
(E-1 pictured above)
Need replacement parts? Order in our shopping cart: 
Hold your mouse over the part for the number or click if an area.
Control Housing Controller Board and KeyPad
Blades, Heater, Oiler Pad Tank, Brushes Inside the top cover
Tape Plates and Feed Wheels Motor Side
The only difference between the E-1 and E-2 model is the electronic eye. If you need a replacement for the eye, order part #E1-9.
Part Number |
Description |
| EM1-1 | Top Cover - Black |
| EM1-2 | Rear Cover - Black |
| E1-3 | Motor and Chain Cover - Black |
| E1-4 | Complete Control Unit - Order Black or Gray |
| E1-4AP | Control Unit Access Cover - Black |
| E1-4APR | Control Unit Access Cover - Gray |
| E1-4D | Encoder Disc |
| E1-4KP | Key Pad |
| E1-5 | Off/On Lighted Switch |
| E1-6 | Foot Threadle Assembly |
| E1-8 | Power Cord |
| EM2-1 | Water Tank Assembly |
| EM2-2 | Water Bottle - Long Style |
| E2-3 | Moistening Brushes - Set of Three |
| EM2-4K | Water Bottle Kit w/Mounting Brackets |
| EM3-1 | Upper Tape Plate |
| E3-2 | Lower Tape Plate |
| E3-3 | Urethene Feed Wheel |
| E3-3K | Urethene Feed Wheel Kit |
| E3-4 | Feed Wheel Shaft |
| E3-4C | Collar |
| EM3-5 | Felt & Bracket |
| EM3-5K | Felt & Bracket Kit |
| EM3-6 | Spring for Felt & Bracket |
| E3-7 | Rod Under Tape Plate |
| EM4-1K | Shear Kit |
| EM4-2 | Brass Rollers |
| E4-3 | Heater |
| E4-3CL | Heater Wire Clamp |
| E4-3S | Heater Socket |
| E4-3NP | Name Plate |
| E4-4 | Cutter Spring |
| EM4-5 | Pivot Rod for Heater/Felt |
| EM4-6 | Retainer |
| E5-1 | Motor Assembly |
| E5-2 | Motor Brush (Set of 2) |
| E5-3 | Motor Brush Cap |
| E5-4 | Chain |
| E5-5 | Solenoid |
| EM6-1 | Lower Front Cover |
| EM6-2 | Tank Shelf |
| EM6-3 | 5" Tie Screw |
| EM6-4 | Rear Tape Basket |
| EM6-5 | Vertical Tie Plate |
| EM6-6 | Tape Guide |
| EM6-7 | Tape Guide Tie Rod |
| EM6-8 | Rubber Foot |
| E7-1 | Lower Feed Assembly |
| E7-2 | Cutter Yoke |
| EM7-3 | Wood Roller |
| E7-4 | Yoke Stop |