Phoenix M1 and M2 Series
The spring configuration of the Phoenix M1 is similar to the BP333. Note the handle return spring runs from the center of the machine to the front, and the crank spring runs from the center to the rear. This places less strain on the bearings on the machine.
Need replacement parts? Order in our shopping cart: 
| EM2-4 | Bottle |
| EM2-4K | Bottle and Bracket Kit |
| M4-4 | Crank Spring (From post to wood roller to rear of machine) |
| M4-7 | Wood Roller |
| M4-8 | Handle Return Spring (From cam eye around wood roller to front of machine) |
Hold your mouse over the part you need and see if the number appears. If an "area" appears, click to go to a better page or select from below.
Click on the links below for pages relating to: Main Parts Page
Brushes and Tank Gears Inside Parts