National Package

No. 351 and 351SW Electric Label Dispenser

Discontinued

Dispenses pressure sensitive labels of any length, up to 5 1/4 inches wide. As a label is taken from the machine, the next label advances automatically.  Label feed is controlled by a photoelectric sensor. Since the label does not touch the sensor, the No. 351SW is especially well suited for dispensing small, fragile, or irregular-shaped labels. 

Solid metal construction with smooth tan powder coat finish. Heavy gauge top plate permits stamping or writing on labels as they are dispensed.

 Control switch has two positions:

  • AUTOMATIC - As a label is lifted from the machine, the roll advances until the following label projects over the photo cell, then stops. Cycle repeats as the next label is taken.
  • MANUAL - Labels advance as long as the switch is pressed.

No. 351SW Electric Label Dispenser    Video

The No. 351SW has a scrap re-winder mounted at the rear to collect the carrier sheet as labels are dispensed.  (See video clip)

The No. 351 basic unit (no collector for carrier sheet) Pictured above.

Maximum label width: 5 1/4" inches, rolls or fan-fold
Maximum roll diameter: 12 inches

Counter Space:
    No. 351SW 7" x 22"

Electrical: 115VAC, 60 Hz, 2.5a

Shipping Weight:
   No. 351SW - 13 lb.

Click here for the parts list.

For other models, click here.