Pro Pack Solutions, Inc.

Celebrating 50 years of service from 1958-2008

Click here for the NEW Baby Umet 75  to handle up to 3" pressure sensitive tape.  Compact and HEAVY duty, uses a serrated blade.

Click here for the TDA080 for 3" clean cut pieces of tape.

abm electronic dispensers for Pressure Sensitive tapes

SAE-23 models are discontinued.

Designed to provide dependable continuous performance in demanding environments.   Comes with lid cover to protect from dust.  This machine will dispense definite length strips from any roll material with one side of self adhesive coating up to 4 inches width.  A solid state electronic timer determines the length of the strip.   Consistency of length is within 1/4" within the entire measuring range.

Standard Range:  SAE 23 ST 3 1/2" to 52"   -or-  Shorter Lengths Range:  SAE 23 SH 1 3/16" to 19"

Operations:

Push button control for random (green) and selected (black) length Dial Selector with 3" to 52" marks (7.5 to 130 cm).  Auto Mode for random (green) and selected (black) length Dial Selector with 3" to 52" marks (7.5 to 130 cm)

Motor:  120-60 Hz .08 KW

Exit Speed:  57 ft./m (17.38 m/m)

Roll Capacity:

Width: With central setting of pressure orange wheel 3/4" to 4". Narrower width may be used depending on the backing of the tape and changing the position of the traction wheel. For special applications, pressure wheel can be replaced with flat non scoring type.

Length: The standard unit will accept a 1,000 yards roll of 1, 8/2 mil material. Clearance may be increased by inserting spacers under roll holder shaft to accommodate large rolls (over 10" diameter).

Roll Holder:  3" & 1 1/2"

Dimensions:  9 x 16 x 9 1/2 (w x l x h)

Weight:  23 lbs.

Available Options:

   Click on the pictures to get a bigger picture.

SAE-23 (Left) and SAE-23/2 (Right)

abm Electronic Tape Dispensers