Pro Pack Solutions, Inc.

Celebrating 50 years of service from 1958-2008

abm Ink Jet System

ajet 101Ink Jet Printer

The ajet 101 is a D.O.D. ink jet printer which will print one line of 7x5 or 5x5 matrix characters. 255 text messages can be prerecorded; dates, time, Julian dates, work shifts, and consecutive numbering can all be imbedded into the text messages. The print can be reversed and/or printed upside down allowing complete freedom of placement of the heads on the conveyor line in any position.

Call for pricing information and area dealers.

All functions of the ink jet printer are programmed via a RS-232 interface. The print heads can be mounted to conveyor lines in various ways.

The ajet 101 can print on a wide range of absorbent or non-absorbent surfaces.  We supply a variety of abm inks for most any surface.

The ink can be supplied from various size containers ranging from a ˝ liter to five gallons. Air pressure can be supplied from factory air or from independent optional air systems available from abm marking ltd.

Specifications

Electrical Requirements: 110 volt 60 Hz power
Sensing Device: Photocell
Print Heads: One
Character Height: 11, 15, 20, or 28 mm in a 7 dot matrix. (20 mm standard)
Ink: abm Ink Jet Porous, Ink Jet Non-Porous and SAFEMARK® Ink Jet
Ink Consumption: It is a meaningless data because of the wide variety of conditions that may be experienced. In one controlled test 1,800,000 characters per gallon were printed.
Character Fonts: 64 character ASCII set
Message Capacity: 255 messages of 60 characters each. Data is stored in a serial EEPROM
Interface: All functions a programmed via a RS-232 interface to almost any computer or hand held terminal. However, all electronics are within the printhead and once print parameters and messages are entered the ajet 101 does not need to be connected to a terminal.

Interested in leasing?  Email us for current rates.  Click here for details.