Pro Pack Solutions, Inc.

Celebrating 50 years of service from 1958-2008

abm JET PRINTING INKS ARE AVAILABLE IN VARIOUS FORMULATIONS:

NOTE: These inks are for industrial Ink Jet Printers mounted on conveyor line; not desktop printers.

A - STANDARD GRADE

This ink is fast dry on the printing surface, with controlled evaporation for reduced equipment maintenance. It has excellent dot formation and has excellent penetration on most porous surfaces. It features long term life in the unit and good sunlight resistance. This is a water based ink filtered to one micron.

Standard grade inks are available in three levels of contrast (ECONO ink, MEDIUM and HIGH density) and three colors - red, blue and green. Custom colors are also available. Medium and high density inks exceed sunlight resistance requirements for exposure in tropical areas as per TTI 1795.

B - SAFEMARK® JET INK

This is a water base non hazardous ink, formulated with ingredients certified for use in Food, Drug, and Cosmetics. It features good sunlight resistance, drying time, dot formation and penetration on most porous surfaces. It has indefinite life inside printheads and in storage.

No equivalent ink is presently being offered by any other manufacturer. abm Safemark Jet Inks are non toxic to human or animal life and pose no environmental risk.

C - NON POROUS SURFACES JET PRINTING INKS

This ink will mark on most nonporous surfaces. It is medium fast drying, non smearing and has excellent resistance to sunlight, rubbing and high temperature, high humidity environments. This ink is available in black, red, blue, green and ultraviolet.

This is an alcohol based product, flammable and does require proper handling, storing and disposal procedures. Compatibility of alcohol based inks to surface coatings always has to be verified and tested. The very wide range of surface treatment and coatings and of the substrate may affect the suitability of alcohol based inks.

D - MEK INKS

Methyl Ethyl Ketone based inks give a dependable and consistent marking on most surfaces and coatings. They have fast evaporation and high solids content which offer excellent dot definition and readability. MEK inks are recommended for metal, ceramics and plastics. they are available in black, violet, blue, yellow and white (pigmented).

NOTE: Methyl Ethyl Ketone inks are not approved for use with the AJET 101.

***For Ink Jet Comparison Chart on Inks, click here.***

Above ink pricing available via e-mail.   Please send us your current equipment model number(s), color desired, and type.