Label Pro 5.5H Manual Label Gluer Parts List
ST50 Acorn Nut
ST52 Screw for Guide Plate - 5/16"
long
GL37 Guide Plate
ST16 Bushing
GL11XX Rubber Roller Assembly (black roller)
ST47 Spiral Pin for Large Gear
ST24 Retaining Ring
SX49B Brass Washer
GL23 Large Gear (on end of large black
roller)
GL3 Cover
GL31 Pressure Plate Spring
GL49 Stripper Rod
GL39X Finger Assembly
GL49X Stripper Rod Assembly Complete
GL51 Stripper Rod Bracket
ST21 Screw for Bracket - 3/16" long
GL29 Pressure Plate
GL20L Left Bearing Plate
K230AB Nut
GL18 Pivot Arm Spring
ST21 Bearing Plate Screw
GL14 Pivot Arm
GL16 Shoulder Screw
GL36 Inner Gear (held in w/3 screws -
one on each glue roller)
GL24XX Lower Roller & Gear Assembly
GL24XXFG Lower Roller & Gear Assembly for LPR5.5H-FG*
GL24XXH20 Lower Roller & Gear Assembly for LPR5.5H-H20
GL4X Base & Foot Assembly
GL40XX Upper Roller Assembly
GL40XXFG Upper Roller Assembly for LPR5.5H-FG*
GL40XXH20 Upper Roller Assembly for LPR5.5H-H20
ST208 Roll Pin for Outer Gear
GL54 Outer Gear (with shoulder - held
in w/pin ST208)
GL20 Right Bearing Plate
ST20 Screw for Inner Gear
* Model No LPR5.5H-FG provides full glue coverage of the label as opposed to
the "corduroy" (striped) glue coverage of the standard gluer. Full glue
coverage model requires the use of adhesives with viscosities of 3,000 to 5,000
cps.
