Potdevin Edge Gluers

Perfect for gluing labels on the edge for applications to cans, etc. Applies from 1/8" up to the width of the glue roller. Available in 1", 2", 4", 6", 8", 12", and 15" rollers. Top and bottom side coaters can also be made to order. Optional electric animal glue heater. Higher temperature "Hot Melt" models also available.

Key Benefits   Video

  • Industrial applications
  • Glues partial labels
  • Fast

Wide range of applications

Model

 Base Model 
w/SS rollers		 Portable 
Floor Stand		 115 or 220 V
Glue Heater
Margin Gluer 1" 190M-MG01
$4,400		 190A-MG01S
$510		 190A-MG01
$1,200
Margin Gluer 2" 190M-MG02
$4,510		 190A-MG02S
$510		 190A-MG02
$1,200
Margin Gluer 4" 190M-MG04
$4,650		 190A-MG04S
$510		 190A-MG04
$1,200
Margin Gluer 6" 190M-MG06
$5,450		 190A-MG06S
$510		 190A-MG06
$1,525
Margin Gluer 8" 190M-MG08
$5,665		 190A-MG08S
$510		 190A-MG08
$1,525
Margin Gluer 12" 190M-MG12
$6,195		 190A-MG12S
$510		 190A-MG12
$1,895
Margin Gluer 15" 190M-MG15
$6,720		 190A-MG15S
$510		 190A-MG15
$1,895

Add for Left Hand Feed:  $1200

Special motors are available:

add  for 220v, 3 phase, 60 Hz
add  for 115v, 1 phase, 60 Hz, Explosion Proof Motor and Switch
add  for 50 Hz Motors

Variable speed motors available. Advise Maximum/Minimum speeds and voltage when requesting quote. Prices for Air Motors and other type special motors of different electrical specifications available upon request.

* For Paper Sheet Edge Gumming

 Made in USA

If you need a NAFTA Certificate with your purchase to Canada
 or Mexico request one at the time of purchase!

Clean up a pain? Glue stuck everywhere? Need a solution to make clean up a breeze? Release-Cote by Potdevin is the best releasing agent available on the market today! For more info click here. Looking for Potdevin Glue?  For more info click here.

Model
Hot Melt
Margin Gluer		 Hot Melt Edge Gluer Portable Floor Stand Add Cost For Speed Control 115v only
190A-HMSC		 Add for single chain drive feed rollers
190A-HMFR		 Solid State Temp. Controller
190A-HMTC
1" - 115V 190M-HM01
$6,495		 190A-HM01S
$480		 $1,575 $1,055 $1,995
2" - 115V 190M-HM02
$6,595		 190A-HM02S
$480		 $1,575 $1,055 $1,995
4" - 115V 190M-HM04
$6,795		 190A-HM04S
$480		 $1,575 $1,055 $1,995
6" - 220V 190M-HM06
$7,095		 190A-HM06S
$480		 $1,575 $1,055 $1,995
8" - 220V 190M-HM08
$7,395		 190A-HM08S
$480		 $1,575 $1,055 $1,995
12" - 220V 190M-HM12
$7,795		 190A-HM12S
$480		 $1,575 $1,055 $1,995
15" - 220V 190M-HM15
$8,395		 190A-HM15S
$480		 $1,575 $1,055 $1,995

For complete part number add "Hot Melt Margin Gluer" to model number.

The follow Reserve Tanks available for the Hot Melt Margin Gluer:

1-Gallon, 115v, Temp: 60-450°F, 1/2" Heated Valve, 16" Legs
1-Gallon, 220v, Temp: 60-450°F, 1/2" Heated Valve, 16" Legs
2-Gallon, 115v, Temp: 200-550°F, 3/4" Heated Valve, 16" Legs
2-Gallon, 220v, Temp: 200-550°F, 3/4" Heated Valve, 16" Legs
5-Gallon, 230v, Temp: 100-550°F, 3/4" Heated Valve, 16" Legs

Support Documents: