Pro Pack Solutions is forwarding all requests for SpecTape directly to the
expert.
Call Arlin Tate direct at
800-468-4053, or 770-934-4053.
Arlin owns SpecTape of Atlanta and
is available to answer your technical questions.
SpecTape offer Vinyl Tapes for industrial applications.
VINYL TAPES
ST-307 7-MIL ALL WEATHER VINYL ELECTRICAL TAPE - A virgin vinyl plastic
electrical tape that pulls smoothly from the roll, stretches to correct tension without
breaking, conforms perfectly, and adheres to sharp contours. Application
temperature range: OºF to 140ºF. Once wrapped, stays in place from -40ºF to +
176ºF and higher.
ST-308 - 8.5-MIL ALL WEATHER VINYL ELECTRICAL TAPE - Application
temperature range: OºF to + 140ºF; temperature range after application: -40ºF to
+176ºF. High elongation and recovery lead to excellent conformability and
exceptionally tight splices. Easy roll release and excellent bond of the adhesive to
the vinyl prevent edge bleed in the roll and after application.
ST-351 - VINYL ELECTROPLATERS TAPE - Heavy duty backing and adhesive
have been formulated to withstand the effects of acids, alkalines, hydrocarbons,
and other solvents used in plating operations. Very low creep to assure sharp line
plating patterns. Temperature range: -20ºF to + 175ºF. Good conformability.
Designed for masking applications of the electroplating and printed circuit board
industries. Meets Federal Specification HH-T-0025.
ST-3040 - 5.5-MIL VINYL - COLORS - Excellent conformability for application
around sharp curves and irregular surfaces. Excellent resistance to alkalis, acids,
and oils as well as a good resistance to alcohols. Very good moisture barrier.
Temperature range after application: -20ºF to + 175ºF. Good impact and rupture
resistance. Ideal for color coding, bundling, can sealing, and floor marking
applications. Colors available: black, brown, gray, light green, dark green, orange,
red, yellow, white, light blue, dark blue, purple, and transparent. 36-yd and 60-yd
roll lengths available. Meets Federal Specification PPP-T-0066B, Type 1.
ST-3050 - BLACK/YELLOW VINYL HAZARD TAPE - Has the same outstanding
properties as ST-3040, however is constructed of a heavier backing for even better
resistance to moisture, chemicals, and abrasion. Designed for lane marking in
heavy traffic areas.
ST-3100 - 10-MIL VINYL ELECTRICAL TAPE - Excellent conformability.
Electrically pure adhesive system with firm anchorage to the vinyl backing to
prevent edge bleed. Corrosion resistant. High elongation imparts good impact
and tearing resistance. Excellent for bus bar insulation.
ST-3200 - 20-MIL VINYL ELECTRICAL TAPE - Same basic characteristics as
ST-3100, however heavier backing allows for even better resistance to moisture,
abrasion, and chemicals as well as imparting greater insulation protection.
