Start International ELM Series

Model M1000

M1000Order button

The Standard M1000.  Check for the Start Hologram Label to insure you get the ELM model.  Order our Item #195M-ELM1000. ***Optional Accessories***

Over the years Start International has taken the standard dispenser and modified it to handle an assortment of different types of pressure sensitive tapes and materials.  Below are 6 different variations.  The best way to determine the best unit is to fill out a material evaluation sheet and forward a sample roll of material to us for testing.

Video M1000 2" PVC Tape Dispenser
Video Auto Mode
Video Manual Mode

Modifications are available on the following machines:

Modifications
B
C
D
E
K
T
NM
M1000
X
X
X
X
X
X
X
M1100
X
X
X
X
M2000
X
X
X
X
X
X
M2200
X
X
X
X

B = Modified advancement roller for extra narrow tapes (1/8" / 3.2mm)
C = Modified cutting head for flimsy and glass cloth tapes
D = Modified circuit board for minimum length setting of .2" (5mm)
E = Dual sensor cutting head that allows for the dispensing of 2 rolls of tape
K = Puts a crease in thin tapes that have a tendency to curl up
T = Thin-tape dispenser for very thin and difficult to dispense tapes
NM = Modified with special flat tape advancement roller for protective films

Unless noted below each model offers the following specs:

M1000B

This model M1000B has been modified to handle narrow tapes.  Unit handles from .125" (3.2mm) up to 2.0" (50.8mm).  Order our item #195M-ELM1000B

Order button

M1000C

The M1000C has been modified to handle "Glass Cloth Tape" which by nature is flimsy. 

Order our item #195M-ELM1000C

Order button

M1000D

The M1000D has been modified to dispense very short pieces of tape.  The length dispensed runs from .197" (5mm) up to 39" (999mm).  We recommend using tweezers for tape under 15mm. 

Order our item #195-ELM1000D

Order button

M1000E

With so many other machines on the market able to do two rolls, ELM now offers the M1000E!  Get two pieces at the same time.  The cutter unit has been modified with two electronic eyes and the spool holder allows the rolls to spin independently. 

Our item #195M-ELM1000E

Order button

M1000T

Then there are the difficult tapes...  This M1000T dispenses and cuts very thin tape. 

Item #195M-ELM1000T

Order button

M1500W

The M1500W Light Duty Tube and Wire Cutter ensures consistent quality and size of parts when dispensing tube stock up to 2" (50.8mm) wide.  Optional large reel stand for material up to 13.5" available. Our Item #195M-ELM1500W.  **Material Test Recommended or a 30% restocking fee applies.

Order button

M2000

The M2000 can be programmed to dispense three different lengths of tape. 

Our Item #195M-ELM2000Order button

M1100

The M1100 with Safety Guard System is similar to the M1000  but incorporates extra safety measures.  The major difference is the length of tape dispensed:   1.18" up to 39".   Item #195-ELM1100

Order button

***Optional Accessories***

Support Documents:

To order parts:Order button

Operators manual in .pdf format.

Call or e-mail to click here with your specific requirements.

Looking for a faster way to use PVC tapes to seal cartons?  We recommend either using tape guns or automatic case sealers.  If you try to use a counter top automatic dispenser like the M1000 for taping boxes, the tape is too difficult to handle and will stick to everything once dispensed.  If you are looking to speed up your operation, we recommend using a gummed tape dispenser.  Overall they are faster and you only need ONE piece of tape to seal the flaps.

For a quick look at competitive machines, click here.