3" Refillable Fountain Roller with Black RolMark Ink

Your Price: $97.10

Retail Price:$135.00

You Save:$37.90(28%)

Part Number: 180M-RFR200-30BK

The item you are trying to purchase is currently out of stock.
Please enter your name, email, and phone number below.
We will contact you as soon as this product is available.

Name: *

Email: *

Phone: *

Verification: *

Type the word above...

Quantity

Info
Support

3" Refillable Fountain Roller with Black RolMark Ink

The pump action of Marsh Fountain Roller gives you fast, uniform ink dispensing without fading or flooding. Used for stenciling messages on crates, boxes and wood.

Durable aluminum and brass construction for tough environments.
Long wearing neoprene roller. Environmentally friendly - refill from Marsh quart or gallon ink cans and reduce packaging waste.
Replacement rollers available, click here.

3" (76 mm) roller width with RolMark Ink for use on porous or non-porous surfaces.

RolMark ink must be shipped by ground. For expedited delivery options, please call our office - (770) 554-1187.

For full pdf instructions, and a schematic, click here.

Inking

Fill the Fountain Roller handle with the proper ink. We offer Marsh Rolmark and K Stencil.
Pump roller 30 to 50 strokes while rolling back and forth on stencil board. (Do not use an absorbent material.) For uniform distribution of ink, apply extra pressure and use an inking path of at least 12".
To test for uniformity, make a test roll on a clean carton using normal rolling pressure.

Stenciling

Pass the roller back and forth over the stencil with straight passes. If one side of the roller inks too heavily, turn it over.
When more ink is needed, pump once or twice before or while stenciling.

Operating Hints

To correct unequal distribution of ink, roll on a test surface applying extra pressure.
Do not allow the roller to dry.
During continuous stenciling, occasionally pump ink to prevent drying.
When not in use, use the roller cover to protect the foam rubber.

Cleaning the Inking System

Remove the screw and then the roller.
Wipe spindle and cover the orifice with an absorbent cloth.
Fill the reservoir 1/4 full with the proper solvent: Rolmark Solvent (if using Rolmark Inks) or K Stencil Solvent (if using K Stencil Inks).
Shake vigorously; then empty the reservoir.
Refill the reservoir 1/4 with solvent. Keep orifice covered with an absorbent cloth. Flush roller by pumping.
Drain all the solvent, lubricate seals and bearing with light machine oil, reinstall roller and refill with proper ink.

Replacing the Roller

Remove the screw and then the roller.
Wipe and lubricate the spindle with light machine oil.
Install the new roller

Replacing the Pump

Unscrew the hex nut and remove the pump assembly.
Lubricate casting and threads of the new pump with light machine oil.
Install the new pump assembly with the hux nut.

Replacing the O-Rings

Remove the screw and then the roller
Remove the O-Rings with a pointed tool; be careful not to damage the bearing surface.
Install the new O-Rings
Lubricate the O-Rings and bearings with light machine oil and reinstall the roller.

Replacing the Spindle (1 1/2" // 3")

Remove the screw and then the roller.
Unscrew the spindle using pliers to grasp the neck area
Install the new spindle by using pliers to grasp the neck area.

30867 Replacement Roller 1-1/2 Inch

$17.95

Add To Cart

3" Refillable Fountain Roller with Black RolMark Ink

Related Items

Mailing List