Better Packages BP333

Feeding the tape.

When the tape runs out, remove the upper tape plate and throw away the piece of tape left between the feed roller and the cutter blade.  Re-insert upper tape plate and replace with a new roll of tape.

First open the back of the machine and set the tape guides to the grooves and slots slightly wider than the roll of tape:

Drop a roll of tape between the tape guides and pull off a 24" leader:

Guide the tape leader over the wooden roller in the back of the machine:

Guide the tape over the chrome roller and onto the lower tape plate:

Finally push the tape under the upper tape plate to the cutter blade:

Close the covers and operate the machine.