This adhesive is specifically for the Padding industry using coated stock.
Product Type: A hot melt adhesive consisting of 100% thermoplastic resin. This product is formed in small pastilles making it easy for automatic feeding devices.
Applications: A low temperature general case and carton sealing & tray forming hot melt adhesive for standard and some coated corrugated board stock. It can also be used as a padding adhesive where water white clarity is not required.
Features: Semi-translucent, medium hard, high performance fast speed of set product. It is designed for application temperatures of 300-325 degrees F. It has a long pot life with low smoking qualities with a good balance of adhesion, heat stability and hot tack.
Application Equipment: Spray and extrusion systems for case and carton sealing and case making equipment.
FDA Status: Ingredients comply with regulations for us in Food Packaging Adhesives as per regulation 175.105.
Clean Up Solvent: Wax or other hot melt cleaners suggested by equipment manufacturers.
Storage Conditions: Store at room temperature. Rotate stock using oldest material first.
Box of 30 pounds. Shelf life is 12 months.
*NOTE: Surfaces and information above are suggestions only … final tests for suitability remain the responsibility of the user. As with all hot melt adhesives the user must take care to avoid getting hot adhesive on the skin. Eye protection and protective clothing recommended.
See MSDS for details.
