Bottle-Matic Labeling Area
Mouse over the image below to display corresponding part number. Common parts are listed first, then parts that are based on the 10" wide machine, and then the 16" wide machine. Please make sure you order the correct parts for your machine width!
| Part Number | Description | |
|---|---|---|
| Common Parts | ||
 |
1032-1 | Thumb Screw |
| |
16121 | 115v. Toggle Switch |
| 16131 | 5/8 Bronze Bushing - (2) per machine | |
| |
18006 | Table Lock |
| |
18015 | Table Lock Bolt |
| 45204 | Rubber Grommet | |
| BM007 | Right Side-Frame | |
| BM008 | Left Side-Frame | |
| |
BM009L | Left Bottle Adjustment Bar |
| |
BM009R | Right Bottle Adjustment Bar |
| BM010 | Aluminum Bottle Roller | |
| |
BM012L | Left Aluminum Bottle Roller Block w/ Bushing |
| |
BM012R | Right Aluminum Bottle Roller Block w/ Bushing |
| |
BM012-2T | Optional Tall Block Mounting Rollers (set) |
| |
BM014 | Pressure Arm Assembly |
| |
BM015 | Bottle Guide - Metal |
| |
BM016 | Bottle Guide Mounting Block |
| |
BM019 | Roll Guide (2 per set) |
| |
BM020 | Roll Guide Tension Spring |
| BM1051 | Switch Housing | |
| |
BM16105PE | Microswitch and Housing |
| ~~~ | ||
| 10" Wide Machine | ||
| |
10005 | 10" Dispensing Table |
| |
10009 | 10" Hold-down Plate |
| |
10010 | 10" Roll Holder Rod |
| |
10106 | 10" Rubber Driver Roller |
| |
10172 | 1/2" x 10" Chrome Rod |
| 101081 | 10" Chrome Feed Roller | |
| 101082 | 3/8" x 10" Blued Rod | |
| 101083 | 3/8" x 10" Chrome Rod | |
| |
BM10010 | 10" Aluminum Bottle Roller |
| BM10172 | 1/2" x 10" Flat Shaft | |
| ~~~ | ||
| 16" Wide Machine | ||
| |
16106 | 16" Rubber Drive Roller |
| 16108 | 16" Feed Roller Assembly | |
| |
16172 | 1/2" x 16" Chrome Rod |
| |
18005-s | 16" Dispensing Table (sharp) |
| |
18009 | Hold-Down Plate |
| |
18010 | Roll Holder Rod |
| |
161081 | 16" Chrome Feed Roller |
| |
161082 | 3/8" x 16" Blued Rod |
| |
161083 | 3/8" x 16" Chrome Rod |
| 161084 | Feed Roller Hinge | |
| 161085 | Hinge Bushing | |
| 161087 | Long Hinge Spring | |
| BM16172 | 1/2" x 16" Flat Shaft | |
***Please read the description on the Microswitch Assembly. For older machines, you will need to replace the circuit board. You can also upgrade to a double sided machine, or downgrade to a single sided machine depending on your needs.
- Single Sided Label Gap Detector Switch Conversion Kit - Click Here
- Dual Sided Label Gap Detector Switch Conversion Kit - Click Here