Bottle-Matic Label Switch

	First generation switch is shown above. The new style shown below will not work on the older units unless you change out the circuit board.
	The second generation switch is easier to adjust for proper function and utilizes a mechanical photo eye.
	The current generation switch needed to be changed to due the manufacturer's supplier discontinuing the internal eye component. The new switch has a white sticker next to the thumb screw. If updating, you will need to replace the circuit board. Bottle-Matic Label Gap Detector Switch Conversion Kit - For single label dispensing Bottle-Matic II Label Gap Detector Switch Conversion Kit - For dual label ("front & back") dispensing
	If you have an OS (optical sensor) machine, your sensor will look like this.

Switch Area