Table top impulse arm sealers are a quick and low cost means for sealing thermoplastic or poly film materials.
The unit comes with an adjustable timer allowing for different bag thicknesses. There is NO CUTTER on this unit. Click here if you're interested in this unit with a material cutter.
To use the sealer, place the bag across the Teflon covered heating wire, press the arm down, watch the red light turn on then off or listen to the unit cycle, continue to hold the arm down for 2 seconds after the cycle completes so the seal congeals, then raise the arm and remove the sealed bag.
This unit is also available with a magnet: AIE-300HIM. The magnet helps streamline the sealing process/time. For a magnet AND cutter, click here.
