BM16105-OLD Round Wire Label Switch (2nd Version)
Bottle-Matic micro-switch with housing and cable assembly incorporating photo eye technology.
There have been three versions of this switch over the years.
- The first one used a flat cord. This switch was discontinued over 10 years ago. If you need to replace the switch you will need to replace the circuit board. Call us for more info.
- The second version used a round cord. This switch was used up to May 1, 2022 on the Bottlematic, but is still being used on the Flexmatic. Due to the manufacturer's supplier discontinuing one of the electronic components in the switch, the manufacturer had to change the wiring and circuit board. To differentiate between this version and the current version a white sticker was added on the housing. If you don't have the white sticker, this is the switch you need. After the current inventory is exhaused the circuit board and switch will need to be updated to the new style.
- For the newest version with the white sticker click 135P-BM16105-NEW.
If you need any assistance in determining which version switch you need, please give our office a call or send us an email: (770) 554-1187 // [email protected]
These are the round wire label switches on the Bottle-Matic and Flex-Matic models.
Having problems repairing your label dispensers? Check out our service options - click here. Pack it up, include contact information or fill out our Service Ticket, and send it in for a free repair estimate.