Apply an even coat of hot melt adhesive to a variety of substrates with the MELTCATOR hot melt adhesive applicator from The Gluefast Company, Inc. This efficient hot melt gluing machine is designed to facilitate uniformity of application, replacing hot melt glue guns with less down time, and greater throughput for virtually any combination of materials and hot melt adhesives. At Gluefast, not only do we offer holt melt adhesive application equipment of exceptional quality and reliability, but we offer hot melt adhesives that form a bond quickly simply by cooling, are compatible with most materials, and are clean and easy to handle. This includes pressure sensitive hot melt adhesives that are not hot to the touch immediately after application of adhesive.
The MELTCATOR hot melt adhesive applicator is equipped with an electronically controlled thermostat that provides variable temperature control. The speed of the roller is also variable. Both the speed and temperature controls allow the user to adjust the hot melt adhesive machine for a specific application. This adhesive application equipment also has a motor lock-out switch to prevent damage to the motor if it is turned on before the adhesive is molten and an optional Pressure Bar Attachment for materials up to 1/2" (1.3 cm) thick. Without the attachment the operator moves the item to be glued over the glue roller by hand.
The Meltcator-2 can glue items up to 4.3” (110mm) thick with an optional pressure bar attachment.
The 120-volt (220 volts available) hot melt adhesive machine is ideal for applying hot melt adhesives onto flat surfaces. The MELTCATOR hot melt adhesive applicator is particularly great for corrugated build-up, gluing foam to foam, and foam to corrugated for protective packaging. With a glue tank holding about five pounds of hot melt, this heavy-duty hot melt roll coater is designed for consistent daily use and years of service in a factory setting.
Pictured: Meltcator with optional Pressure Bar Attachment.
