Fits the BP333 and drives the GE79X to feed the tape. If the handle slips when pulled, and the feed wheel and gear do not turn, the pawls may be worn. Remove the three screws from the gear cover and inspect.
The stud that holds on the pawl is the FM43 and the spring is K45. Note: You will need to order the FM43 studs if you need to replace the pawls.
When replacing the pawls make sure you have them in the right direction. You can note this direction prior to removing the old pawls.
Having problems repairing your tape dispensers? Check out our service options - click here. Pack it up, include contact information or fill out our Service Ticket, and send it in for a free repair estimate.
