A total turn-key solution by MSSC to print date codes, shift codes, expiration dates, use by dates, sequential numbering, addresses, even logos simultaneously as gummed tape is dispensed. Printing area is 1 cm by the length of your message in continuous mode.
Our turn-key solution includes everything you need to be up and running upon receipt. We include the Marsh TDE tape dispenser, Smart-Jet Blue ink jet printer, two 80300 porous ink jet cartridges, encoder wheel and mounting bracket.
To order we recommend calling our sales department.
For more information on the printer, click here. For more information on the tape machine, click here.
We have made it possible to simultaneously dispense gummed tape on all existing Marsh TD2100 models both manual and electronic, and print a code on the tape while it's being dispensed!
Need help with a design tool? Click here for the link.
Make sure to register your printer for warranty with the factory. Click here.
Blade maintenance is required when using the heavier tapes and in some instances can interfere with productivity. On the newer 2100 style machines you will need to remove the blade guard to clean and oil the blade. On the older machines the scissor blades are held in place with only two screws, it will take approximately five minutes to remove and clean. At Pro Pack we do not recommend spray type cleaners or spray oils on this machine due to the possibility of over spray on the moistening brush. The blades are cleaned with a solvent type fluid (lighter fluid works great) and coated with a thin film of oil that will prevent build up of gummed materials.
With single brush moistening it is also very important to keep the brush clean weekly with soap and water. Use of dish wash detergent works best as hand soaps can contain hand softeners which will interfere with the moistening characteristics.