Table top impulse arm sealers are a quick and low cost means for sealing thermoplastic or poly film materials. This unit has a 10 mm wide wire that creates the seal.
The unit comes with an adjustable timer allowing for different bag thicknesses. The built-in cutter trims excess material 1/4" away from the seal.
To use the sealer, place the bag across the Teflon covered heating wire, press the arm down, watch the red light turn on then off or listen to the unit cycle, continue to hold the arm down for 2 seconds after the cycle completes so the seal congeals, then raise the arm and remove the sealed bag.
This unit is recommended for // used in the health care, cannabis, and other industries where the wider seal reliably creates an air and watertight seal on poly bag material. This compact unit has a built-in warning beeper to notify the user when each seal is complete. The seal produced is a embossed, honeycomb texture 10-millimeters wide. This impulse sealer can be used for many other applications that require wider and stronger seals. Equipped with a cutting blade.
