RP40701 Blade Kit - Discontinued.
This kit includes cutter blade holder, movable cutter blade, removable fixed blade, 2 cutter guides, 2 fixed blade shoes, 2 fixed blade shoe springs, 2 button head screws, 2 socket head cap screws, and 1 hex socket set screw.
To replace the blades pick one of the following:
- For all manual machines, TDE110 after serial number 618027, or any machine already modified with the 1/4", click for the RP40703 blade kit.
- For TDE110 before serial number 618026 with the 3/16" pin to convert to the 1/4", click for the RP40704 retrofit blade kit.
- For TDE110 after serial number 618027, or any machine already modified with the 1/4" where you also need a solenoid spring kit, click for the RP40705 repair blade kit.
Every month or two remove the blade guard and apply a drop of light weight oil to the back side of the movable blade to keep it clean and free from built up adhesives from the tape, and also add a drop of oil to the brass guide rollers. If you find material built up on the cutter blade clean with a solvent like lighter fluid prior to applying oil.
Fits on the TD2100 series tape dispensers by Marsh. If you need service, we offer full service in Loganville, GA. More info at our online service portal.
Need new machines? Click for the TDE Electronic, or click here for the TDH manual.
This blade was used on