A Definite-Length Tape Dispensers designed to feed and cut pre-determined or random lengths of pressure sensitive tape. The RT7000 can be used in either a manual or semi-automatic mode. Great for applications in a multitude of industries including: packaging, assembly, electronics, retail, industrial, food service, office and institutions.
The "Reel-less RT-7000" accepts up to a 14" diameter roll of tape and many types of non-adhesive materials. Send us a test roll & we'll provide a free video demo!
Dual electronic eyes allow for either one or two rolls to be dispensed and cut at the same time. Tweezers included for shorter lengths for use by operator to avoid blades. The RT7000 also includes a built in blade oiler to help keep blades sharp and clean. A small container of oil is conveniently stored in a compartment under the unit. There is also a small 'shelf' attached to the blade unit to 'hold' the tape away from the unit.
Built in counter with dispensing a set number of strips of material, or to keep up with the number of pieces dispensed by the operator. Dispensing non-adhesive material without an operator is possible!
Check out the improved RT7700 for even better dispensing.
It is shown when the tape is stuck in the cutter part or the cutter is not correctly mounted in the main body.
Sometimes the motor could be overloaded and stop while feeding the tape.
Not working with the power to the outlet:
Next strip of tape not dispensing after removing one in Automatic mode:
Abnormal operation of the cutter:
Difference between the actual length set versus dispensed:
Tape curled up: