Automatic Impulse Sealers are designed for continuous sealing of thermoplastic materials.
Depending on the model of the automatic impulse sealer, material up to 24" wide and 15 mil thick can be sealed. The seal width ranges from 2mm to 10mm. Equipped with an electronic timer and an electromagnet, automatic sealers are controlled by a plug-in transistorized circuit board. Once correct settings have been established, consistent seals will be maintained automatically.
The manufacturer's replacement kit includes 2 heating elements.
For automatic operation, set the control on auto. Adjust the sealing time (heating time), congealing time (cooling time), and recycle time (automatic operation of jaws). Insert material to be sealed and when jaw opens, remove sealed material.
For manual operation, set the control to manual. Insert the material to be sealed. Press down on the foot switch to activate the sealing bar.
Automatic sealers come with an electric foot switch and worktable.
