HP-100NI Non-Indexing Porous Hand Roller Coder

HP-100NI Non-Indexing Porous Hand Roller Coder

Printing the same information on your cartons, but need an alternative solutions to the expensive ink jet systems? The HP100NI non-indexing, comes with a 2" by 6 1/2" drum circumference. No power, no problem. Humanoid powered.

Contact roller coders are available in a hand held device for printing on porous surfaces. These coders are a perfect solution for applying date codes, lot numbers and other product information where you are looking for a low cost alternative to automatic coding via Ink Jet systems. Print drums accommodate RIBtype rubber printing letters, numbers, and logo dies. (Email for logo info).

The non-indexing model prints impression over and over as long as you roll it along the surface.

Standard printer comes with the HP-100RM Porous Microcell Ink Roller dry. If you want the XF Neoprene ink roller, make sure to select it at the time of purchase. See the support tab for inking instructions based on the roller you select.

Microcell vs XF Neoprene Roller

• Microcell Ink Rolls are the standard ink roller shipped with Universal Hand Printers, and are made from reticulated urethane foam. This material is one of the most durable ink roll materials available, and with proper care should last in excess of one year before replacement becomes necessary. Microcell rolls should be inked with Universal No. 1150 porous coder ink only. It is extremely important to follow the inking instructions or roll performance will be adversely affected.
• XF Neoprene Ink Rolls are made from an extra firm density neoprene material. While not quite as durable as Microcell, the extremely fine cell structure of these rolls provides exceptionally good print quality, particularly when using small character printing dies. Due to their greater ability to compensate for slight die thickness variations, these rolls are also recommended to correct print quality problems when multiple lines of text are required.