Potdevin Type 2R Gluer
Tank Roller Bearings Area
Above - Left side left, right side right of tank roller bearing. Note oil hole in bearing. Add drop of oil daily to keep bearing lubricated. Some older style machines had a plastic type bearing that is now updated with the brass bearing and holder pictured above. Part #2R19CR and 2R19CL.
Picture show glue applicator roller bearing and block.
| PART NUMBER | DESCRIPTION |
|---|---|
| 2R-19CL | TANK ROLLER BEARING - Left Side |
| 2R-19CR | TANK ROLLER BEARING - Right Side |
| 2R- 20 | GLUE ROLLER BEARING |
| 2R-27A | SCRAPER STUD |
| 2R-41L | GLUE TANK GUIDE |
| 2R- 41R | GLUE TANK GUIDE |
| 2R-66 | HOLD DOWN SPRING |
| 2R-68L | TANK ROLLER ARM |
| 2R-68R | TANK ROLLER ARM |
| 2R-233 | COATING ROLLER BEARING CAP |
| 2R-372A | SCRAPER L.H. (PLATED) |
| 2R-373A | SCRAPER R.H. (PLATED) |
| Z-1263 | SCREW |
| Z-1264 | NUT |
| LM-546 | FINGER ROD SPRING |
| LM-652-LA-1 | L.H. FEED ROLLER BEARING ASSEMBLY |
| 2R**-4A | TANK ROLLER ASSEMBLY |
| 2R**-5 | GLUE ROLLER ASSEMBLY |
| 2R**-17 | DRIVE SHAFT |
| 2R**-23A | FEED ROLLER ASSEMBLY CONSISTING OF |
| 2R**-32A | FINGER ROD |
** - Substitute the width of your unit for these asterics in the above part numbers.
Note: The Type 2R gluer has been in production for several decades. When ordering parts, please specify the width of your model and serial number of the machine. If your machine has been modified with aftermarket parts after it was manufactured, we cannot guarantee proper replacement.