Potdevin
NTZ Gluer Bearings Area
Coating Dial (Regulator) Side is the right side of the machine. Hand Wheel Side is the left side of the machine.
| Part Number | Description | |
|---|---|---|
| NTZ-31A | Side Scraper (left and right) | |
| NTZ-38 | Scraper Stud | |
| NTZ-65B | Glue Adj. Block | |
| NTZ-200A | Tank Roller Cap | |
| NTZ-207A | Feed Roller Bearing Cap | |
| NTZ-225B | Feed Table Rest | |
| NTZ-254A | Roller Guide | |
| NTZ-280 | Coating Roll Bearing | |
| NTZ-282 | Tank Roll Bearing (left and right) | |
| Z-1287 | Oil Cup | |
| TSC-164R | Short Adjusting Lever Assembly (right side) | |
| TSC-164L | Short Adjusting Lever Assembly (left side) |
Some parts that are based on the width of the applicator roller:
Note: Replace ** with the width of your unit.
| Part Number | Description |
|---|---|
| NTZ**-2A | Tank Roller (Stainless Steel) |
| NTZ**-2R1B | Tank Roller (Rubber Cover) |
| NTZ**-26B | Glue Adjusting Shaft |
| NTZ**-55AS | Glue Pan |
| NTZ**-60B | Coating Roller (Stainless Steel) |
| NTZ**-60R | Coating Roller (Rubber Cover) |
| NTZ**-220 | Feed Roller |