To purchase a new machine click the model: U25-Micro Switch or U25-Photo Eye.
For more information on all Dispensa-matic models, visit the manufacturer's page.
For .pdf operating instructions, click here.
Hold your mouse over the below images for the part number or description.
| Part No. | Description | |
|---|---|---|
 |
135P-45126-1 | Photo Sensor Circuit Board Assembly 110V |
| Call to order. | 135P-45128-1 | Photo Sensor Circuit Board Assembly 220V |
| |
135P-16121 | 115v Toggle Switch |
| Call to order. | 135P-16122 | 230v Toggle Switch |
| |
135P-16125 | 115v Power Cord |
| Call to order. | 135P-16126 | 230v Power Cord |
| |
135P-45105 | Photo Eye/Housing Assembly (includes thumb screw) |
| |
135P-1032-1 | Thumb Screw (for housing assy) |
| |
135P-16130 | Black Motor Housing |
| |
135P-45150 | 1/2” Rubber Foot (2 per machine) |
| |
135P-45151 | 1/4” Rubber Foot (2 per machine) |
| 135P-25170 | 3 5/8” Chrome Rod (2 per machine) for U-25 | |
| |
135P-45171 | Rod Holder Spacer |
| |
135P-45176 | Side Guide With Thumb Screw |
| |
135P-252501 | Dispensing Table for the U-25 |
| |
135P-252501S | Dispensing Table (Sharp Edge) for the U-25 |
| |
135P-45001 | Large Roll Adapter (OPTIONAL) |
| 135P-18003 | Micro-Switch Extension Kit - Discontinued |
Motor Area:
| Part No. | Description | |
|---|---|---|
| |
135P-45160 | Side Frame |
| |
135P-16121 | 115v Toggle Switch |
| |
135P-45126-1 | Photo Sensor Circuit Board Assembly 110V Old style pictured |
| 135P-45128-1 | Photo Sensor Circuit Board Assembly 220V | |
| |
135P-16130 | Black Motor Housing |
| |
135P-45120 | 115V. H.T. Motor 5/16” Shaft (2951) 50 rpm U45 |
Hold your mouse over the part for the number or description.
| Part No. | Description | |
|---|---|---|
| 135P-16105MS | Microswitch Housing Assembly* | |
| |
135P-25177 | Rubber Tension Washer (not pictured) |
| |
135P-45176 | Side Guide With Thumb Screw |
| |
135P-25200 | Take Up Spool for the U45 |
| |
135P-45201 | Core Insert (2-per-machine) |
| |
135P-25202 | Spring Clip for the U45 |
*NOTE: If you are replacing a micro-switch for a dispenser manufactured with a circuit board prior to March 2024 you will need to order a conversion kit. The manufacturer of the sensor stopped producing the sensor and Dispensamatic had to replace the sensor with a better sensor. We recommend ordering the conversion kit that includes a new board and microswitch. If you are trying to replace a switch that doesn't have a circuit board and is wired in with wire nuts, you will need to update your dispenser with the Micro-switch conversion kit. Click here for the conversion kit.