Dispensamatic Model U-60
You can mouse over the images and individual parts will display text of the part numbers.
Part Number | Description | |
---|---|---|
![]() |
135P-16105 | Microswitch* |
135P-16105-1 | Switch Housing - Discontinued | |
135P-16105-2 | Switch and Lead Wire - Discontinued (See Note Above). | |
![]() |
135P-16121 | 115V Toggle-Switch |
![]() |
135P-16125 | Power Cord |
![]() |
135P-16130 | Black Motor Housing 16-190 Motor Spacer |
![]() |
135P-16190 | Motor Spacer |
![]() |
135P-45001 | Large Roll Adapter (OPTIONAL) |
![]() |
135P-45150 | ½” Rubber Foot (1 per machine) |
![]() |
135P-45151 | ¼” Rubber Foot (2 per machine) |
![]() |
135P-45160 | Side Frame |
![]() |
135P-45171 | Roll Holder Spacer |
![]() |
135P-45205 | 1/8” Microswitch Spacer (1 per machine) |
![]() |
135P-45206 | 1/4” Microswitch Spacer (3 per machine) |
![]() |
135P-U60170 | 7” Chrome Rod (2 per machine) |
![]() |
135P-U60200 | Take-Up Spool |
![]() |
135P-U602501 | Dispensing Table (Normal Edge) |
![]() |
135P-U602501-S | Dispensing Table (Sharp Edge) |
![]() |
135P-U602502 | 6” Chrome Table Rod (2 holes) |
135P-18003 | Micro-Switch Extension Kit (OPTIONAL) - Discontinued |
Motor Area:
Above is the old style U60. Newer Units have a circuit board. If you have an older unit (pre-circuit board), and need to replace the microswitch, you will need to purchase a microswitch conversion kit.
![]() |
135P-16105 | Microswitch Housing Assembly* |
135P-16105-1 | Switch Housing - Discontinued | |
135P-16105-2 | Switch and Lead Wire - Discontinued (See *Note Below). | |
![]() |
135P-16125 | 115V Power Cord |
![]() |
135P-45160 | Side Frame |
![]() |
135P-U60120F | 115V Motor 3/8” Shaft, 90 RPM (3683) STANDARD |
Loose Parts:
![]() |
135P-45172 | 1” Collar for Roll Holder w/ Thumb Screw |
![]() |
135P-45201 | Core Insert Set |
![]() |
135P-U60176 | Side Guide with Thumb Screw |
![]() |
135P-U60202 | Spring-Clip w/ Stop Collar - (top-right part) Used with solid metal take up spool. (both parts limited quantities available.) |
![]() |
135P-U60203 | New Style Spring Clip (Left) |
![]() |
135P-U60200 | New Style Take-Up Spool - Plastic |
135P-U60200-OLD | Solid Metal Take-up spool (right) - discontinued |
* If your microswitch housing assembly is not connected to a circuit board you will need to update your machine with a conversion kit. The 16-105 is updated, and now plugs in to a circuit board instead of wiring to the motor. Call us for details.