Fits Better Packages BP555eSA gummed tape dispenser 115v. If you are looking for the BP555eS logic board, click here.
Note: We recommend using an uninterrupted power supply with surge protector with your electronic gummed tape dispensers to prevent spikes, dips, and surges in voltage.
Need service? We offer full service at our Loganville, Georgia location. Pro Pack Solutions repairs all brands of gummed tape dispensers. We bring your machines back up to 100% for continued years of service.
When you turn on the machine, if the light does not lite on the off'/on switch, the main fuse may be at fault. The main fuse is located next to the power cord and is a 4A, 5mm x20mm fuse, part # ST2341K. If the light lights, and the machine does not work, make sure the to cover (part # E555-035-01) is closed. If closed, make sure the safety switch magnet (part # ST2344) is still in it's place on the side of the cover. If all that looks good, then unplug the machine, remove the side cover, and check the fuse on the circuit board located just below the transformer. This fuse is a 1/2A, 5mm x 20mm fuse, part # ST2128.
